Myst WDIB resources

From A look inside The Link @ wiki
Revision as of 23:41, 19 July 2008 by Clone2727 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Myst
Mohawk Overview
CLRC EXIT HINT INIT
MJMP MSND PICT RLST
VIEW WDIB HELP RSFL
Scripts Variables

This page documents the WDIB image format for all images in the original Windows version of Myst and the cursors in Myst Masterpiece Edition. It is similar to LZ77 with a 0x400 byte ring-buffer. Once uncompressed, it is a plain Windows BMP 8bpp and the bitmap is not compressed. It is in little endian form. Thanks to Petroff Heroj and Ron Hayter for working out the compression.


unsigned short uncompressed size
variable compressed data


Until the end of the resource, each run begins with a byte. Each bit (0-7) defines what to do next. A 1 is an absolute byte (which is directly read into the uncompressed buffer) and a 0 represents two bytes to be read in. The front 6 bits (2-7) represent the length of the run minus 3. The last 10 bits represent the offset in the ring-buffer minus 0x42. If the offset is over 0x400, make sure to subtract 0x400 after adding the 0x42 back into the offset.

The ring-buffer has a constant size of 0x400 bytes. Remember that once you have decoded 0x400 bytes, it loops around to the beginning, completing the loop.

For example:

0xf7                     // decoder byte (11110111b)
0x87                     // absolute byte
0x73                     // absolute byte
0x27                     // absolute byte
0x27                     // absolute byte
0x0b                     // byte 1 of the run data: length = 2 + 3 = 5 (first 6 bits + 3)
0xa9                     // byte 2 of the run data: offset = 0x3a9 + 0x42 = 0x3eb
0x32                     // absolute byte
0x00                     // absolute byte
0x4e                     // absolute byte

From there, see the wikipedia page on the Bitmap file format.